Occupational Hazards of Magnesium Alloy Die Casting

Light alloy die casting mainly includes aluminum alloy die casting and magnesium alloy die casting. Such alloys often contain small amounts of metals which, under certain conditions, can emit toxic fumes. If this composition is contained in the alloy, the released gas should be analyzed to determine its alloy component. 

Light alloy die casting mainly includes aluminum alloy die casting and magnesium alloy die casting.

In aluminum foundries and magnesium foundries, melting is generally carried out in crucible furnaces.

The crucible furnace is often used by burning gas or oil, occasionally there is crucible electric furnace. It is prefer to have exhaust ports around that top of the crucible to remove smoke.

For the oil-burning cauldron, the result of a partial burn from the burner is caused by a failure of the burner to be released into the air.

Using a fuel with high sulphur content can cause sulphur dioxide in the air to reach dangerous levels, so use a fuel with low sulphur content or ensure good ventilation. Furnace smoke may contain complex hydrocarbon compounds, some of them are carcinogenic. 

It would also be exposed to the furnace and the chimney, and it would be exposed to the second vanadium, the second vanadium, which is the product of a furnace that was formed by the oil deposits. The production of magnesium castings may result in significant fire and explosion potential hazards. Molten magnesium will catch fire unless it has a protective barrier between it and the atmosphere, and the molten sulfur is widely used as a protective barrier. Using the hand to add sulfur powder to the work of the sandman in the melting pot is often called dermatitis, and therefore, they should wear gloves made of fire-resistant fibers. 

As magnesium alloy die casting part is common in our life, so there are many die cast plants, in the process of these light alloy die castings, special attention should be paid to the influence of metal material on human body, and protective measures should be taken to ensure the safety of all aspects.

If you want to design and produce your own metal diecast parts, you can contact us, a professional China die casting service supplier.