How To Avoid Zinc Alloy Die Castings Bruising?

Die casting is a very delicate process, if in the process of metal machining, it is often damaged, this will greatly reduce the quality of zinc alloy die casting part and at the meantime increase the manufacturing cost.

Sieg-Huao focusing on zinc alloy die casting, has very professional experience in zinc alloy die casting technology, for product secondary processing technology, quality, delivery, etc. we also have a strong advantage. If in the process of metal machining, it is often damaged, this will greatly reduce the quality of zinc alloy die casting part and at the meantime increase the manufacturing cost.

In order to avoid the zinc alloy casting part bruise, we summed up the reasons and made analysis, hoping to help you.

Here are the analysis on the cause of damage of zinc alloy die casting:

1. When the mold is opened or the edge of the machine is pressed, the edge of the device or table is met.

2. The zinc alloy diecast parts in each operation process are not properly stowed.

3. Improper operation of operators, such as throwing the zinc die casting part, etc..

4. Transfer the zinc diecast parts between processes, such as undivided protection, collapse, etc..

5. The knock against operation tools of each operation, such as the casting of the casting hook, the removal of the clamp, the cleaning process of file, punch, etc. 

Corresponding measures for zinc alloy die-casting collision:

1. Take care when taking these die casting parts. Collision is not allowed.

2. According to the requirements of operation instruction, the diecast parts are not allowed to pile up, must be neatly stacked one by one to the workstation.

3. Do not allow to throw pieces, and handle zinc die castings gently. In case of die-casting process, the casting must be slowly slid down the workbench, so as not to be allowed to bump against each other.

4. The zinc alloy die casting in station appliance must be protected from being separated and transported slowly to prevent collapsing or dropping the casting.

5. Use operating tools correctly to prevent bumps. The die-casting piece is not allowed to be removed or carried to the casting body. The cleaning of the file and punch must be done accurately in the area where it is needed to be cleaned.

During each production process of die casting, we always control every working step to avoid unnecessary damage and lost, the zinc alloy die casting parts we supply are the die castings in best quality condition.

Welcome to come and visit professional die casting manufacturer-Sieg-Huao.